In Table 1(a) for Variant 04, correct the cable type (to be SHF 4.8MS)
Table 1(a): pin reference is excluded for Variant 07
Table 1(a), Para 4.4, Table 6, Figure 2(b): A new variant for the hermetic glass seal (R280760000) is not added. A new Note is added to Variant 07 referring to use of the new hermetic glass seal variant in 3402/023 ('340202307') for hermetic application.
Table 1(b), Figure 2(b): rated soldering temperature is added. Note 1 (& in new Para 3): The original power handling figure is replaced (as provided by Radiall). The order of the categories I, II, III are reversed, and a new note is added that "ESCC Multipactor Tool v1.0" was used to construct the curves.
Figure 2(a) & 3 are replaced by reference to MIL-STD-348 series SMK (in new Para. 1.6.1)
Para 4.3.6: number/rate of cycles is amended to be as specified in ESCC3402 (i.e. 500Qual/100LAT is deleted).
Table 2 & Figure 2(b) (new Para 3): Note added on Variants with components not mounted not requiring measurements per Chart F3.
Table 6: note on measurement details for VSWR is added.
In new Para 3, see attached for details including, as applicable: amend dimension details Add note on mounting of components Amend characteristic values Add note on RF leakage Add notes on the maximum operating and storage temperature ratings, and test frequency being limited by the cable details. Add seal requirements Amend solderability requirements
Add Appendices to permit Manufacturers to still mark the current testing level and material option codes as a Manufacturer Code.
|