|
|
|
|
|
|
|
|
|
|
|
|
the following minor editorial changes (ref. attachment draft_3401077.pdf) are made:
1. Pg. 7 Table 1(a) Note 2 - "b" of backshell shall be lower case (not upper case); "Figure" not "Figures".
2. Pg. 12 Figure 2.4 - Remove the first two columns and add a single column containing two rows. The content of the upper row shall be "Maximum Conductor Diameter mm"; the content of the lower row shall be "Maximum Wire Diameter mm"
3. Pg. 15 Para. 4.2.2 - Add full stops to (b) and (c) i.e. "...applicable." "...equipment."
4. Pg. 16 Para. 4.3.8 - The additional text shall be "with removal tool defined in Figure 4."
5. New Figure 4 added - In the title, correct "REMOVABLE" to "REMOVAL". This Figure shall be located on Pg. 15, i.e. immediately after Figure 3 (on Pg. 14) and before section 4 REQUIREMENTS
|
|
|
Login
